Those modules are numbered from right to left, but only includes
installed modules, I believe. If you had two installed, they would
be--from left to right--1/1 and 1/0.
>>> "Gareth Hinton" <[EMAIL PROTECTED]> 3/23/01 2:50:43 PM
>>>
Hi All,
Can anybody please explain the following:
I've been messing with a 2600 with an NM1E2W running 12.1(5)T
I put a WIC1T in to slot W0, so this understandably became Serial 1/0.
Powered down, removed WIC1T and restarted then WR MEM so any config for
S1/0
is gone.
Powered down. Inserted WIC1T into slot W1.
This also came up as S1/0 as opposed to what I would have expected
(S1/1).
I had successful connections on S1/0 while WIC1T was in either slot.
I'd be interested to see what happens with two WIC1T's in but had to
get the
router on line before I could get hold of another WIC1T.
Anyone know the reason for this?
Thanks,
Gareth
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
