John, Jim,
You're absolutely right, sorry, it was an NM2W, the ethernet was in the
chassis.
Gave me a heart attack and a few manic chuckles for a few minutes, as the
kit got shipped a few thousand miles today.
Cheers,
Gareth
""John Neiberger"" <[EMAIL PROTECTED]> wrote in message
sabb747a.028@fsutil01">news:sabb747a.028@fsutil01...
> Hmmm, you appear to be correct. I'm looking through the quick reference
> guide and I don't see the NM-1E2W as an option on the 2600 series. That
> might be a problem. <g> I wonder if it's actually working.
>
> >>> "Jim Brown" <[EMAIL PROTECTED]> 3/23/01 3:53:34 PM >>>
> I don't think that module is even supported in the 2600's. Someone
> correct
> me if I'm wrong, but can't you only use the NM-1E or NM-2W, not a
> NM-1E2W in
> the 2600's
>
> -----Original Message-----
> From: John Neiberger [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 23, 2001 3:42 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: 2610 Serial Interface Puzzler
>
>
> Those modules are numbered from right to left, but only includes
> installed modules, I believe. If you had two installed, they would
> be--from left to right--1/1 and 1/0.
>
> >>> "Gareth Hinton" <[EMAIL PROTECTED]> 3/23/01 2:50:43 PM
> >>>
> Hi All,
>
> Can anybody please explain the following:
>
> I've been messing with a 2600 with an NM1E2W running 12.1(5)T
> I put a WIC1T in to slot W0, so this understandably became Serial 1/0.
> Powered down, removed WIC1T and restarted then WR MEM so any config
> for
> S1/0
> is gone.
> Powered down. Inserted WIC1T into slot W1.
> This also came up as S1/0 as opposed to what I would have expected
> (S1/1).
> I had successful connections on S1/0 while WIC1T was in either slot.
>
> I'd be interested to see what happens with two WIC1T's in but had to
> get the
> router on line before I could get hold of another WIC1T.
>
> Anyone know the reason for this?
>
> Thanks,
>
> Gareth
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
