this link says it - NO!
http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm
We had a similar discussion not long ago about FE modules and 2600s and it
was interesting because there were people that said they had it working but
then Cisco didn't "support" it in any of their literature.
Might be the same here.
Kevin Wigle
----- Original Message -----
From: "John Neiberger" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, 23 March, 2001 18:05
Subject: RE: 2610 Serial Interface Puzzler
> Hmmm, you appear to be correct. I'm looking through the quick reference
> guide and I don't see the NM-1E2W as an option on the 2600 series. That
> might be a problem. <g> I wonder if it's actually working.
>
> >>> "Jim Brown" <[EMAIL PROTECTED]> 3/23/01 3:53:34 PM >>>
> I don't think that module is even supported in the 2600's. Someone
> correct
> me if I'm wrong, but can't you only use the NM-1E or NM-2W, not a
> NM-1E2W in
> the 2600's
>
> -----Original Message-----
> From: John Neiberger [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 23, 2001 3:42 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: 2610 Serial Interface Puzzler
>
>
> Those modules are numbered from right to left, but only includes
> installed modules, I believe. If you had two installed, they would
> be--from left to right--1/1 and 1/0.
>
> >>> "Gareth Hinton" <[EMAIL PROTECTED]> 3/23/01 2:50:43 PM
> >>>
> Hi All,
>
> Can anybody please explain the following:
>
> I've been messing with a 2600 with an NM1E2W running 12.1(5)T
> I put a WIC1T in to slot W0, so this understandably became Serial 1/0.
> Powered down, removed WIC1T and restarted then WR MEM so any config
> for
> S1/0
> is gone.
> Powered down. Inserted WIC1T into slot W1.
> This also came up as S1/0 as opposed to what I would have expected
> (S1/1).
> I had successful connections on S1/0 while WIC1T was in either slot.
>
> I'd be interested to see what happens with two WIC1T's in but had to
> get the
> router on line before I could get hold of another WIC1T.
>
> Anyone know the reason for this?
>
> Thanks,
>
> Gareth
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
