If you are atempting to plug two Token-Ring cables into one MAU, just make
sure both of those interfaces are on the same network (Which really wouldn't
give you much), But just to test this, get two MAU's do not connect them to
any part of your network, place one cable in one MAU and the other cable in
the second MAU, your beacon errors will go away. The reason you are
beaconing, is the first one to initialize is boss, so when you come with
another connection, the MAU has already been taken. Run the test and you
will see, I'm right.
-----Original Message-----
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 29, 2001 11:45 AM
To: 'Vincent'; [EMAIL PROTECTED]
Subject: RE: Token Ring Question
Both routers have the same ring speed?
Verify the cables. Verify the MAU. Divide a problem into smaller parts. Then
test each part. Substitute a questionable item for a known good item. If the
new arrangement now fails the questionable item is defective. Conversely if
the new arrangement works the questionable item is good. etc.
> -----Original Message-----
> From: Vincent [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, March 29, 2001 9:15 AM
> To: [EMAIL PROTECTED]
> Subject: Token Ring Question
>
>
> For I am not familiar with TokenRing. I just wondering how
> come i insert 2
> router into the token ring hub,
> one of the interface is up/down all the time.
>
> Thanks
> Vincent
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
