have yout tried command 'no debug all'
ma
-----Original Message-----
From: gayathri [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 03, 2001 12:01 PM
To: cisco [EMAIL PROTECTED]
Cc: gayathri [EMAIL PROTECTED]
Subject: debug ip error
Hi Group,
Recently due to some problems my colleague issued a debug ip error
command
on the rsm.
The problem is we could not stop the process at all. We tried using the
no
debug ip error but it never came out of the process, there was a lot of
details regarding routing info . Luckily for us we had HSRP.
We had to reboot the RSM , manually i.e, remove the card and insert it
back.
Is this a common thing that we cant stop the debug ip error process.
Thanks
Gayathri
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
