one tip is to issue the no debug all command prior to issuing debug all. that way when
the router display begins spewing debug info you can issue an up arrow and enter
command
sequence to get out of debug mode.
Gayathri wrote:
> Hi Group,
>
> Recently due to some problems my colleague issued a debug ip error command
> on the rsm.
>
> The problem is we could not stop the process at all. We tried using the no
> debug ip error but it never came out of the process, there was a lot of
> details regarding routing info . Luckily for us we had HSRP.
>
> We had to reboot the RSM , manually i.e, remove the card and insert it back.
> Is this a common thing that we cant stop the debug ip error process.
>
> Thanks
>
> Gayathri
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
