I seem to recall that in some of the (old) CCNA stuff it used the term to
refer to separate routed protocols.  Doyle says that "although SIN routing
usually refers to multiple routing protocols routing multiple routed
protocols on the same router (such as OSPF routing IP and NLSP routing
IPX), it can also refer to two IP protocols routing for separate IP domains
on a single router." (or, presumably, two IPX protocols routing for
separate IPX domains...)

As far as I can see, you can apply the term equally well to routed or
routing protocols.

JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 05/04/2001
08:55 am ---------------------------


"Bradley J. Wilson" <[EMAIL PROTECTED]>@groupstudy.com on
04/04/2001 07:25:37 pm

Please respond to "Bradley J. Wilson" <[EMAIL PROTECTED]>

Sent by:  [EMAIL PROTECTED]



To:   "cisco" <[EMAIL PROTECTED]>
cc:


Subject:  Re: EIGRP and OSPF


I've only heard this phrase used in conjunction with routing protocols -
you
can run OSPF and BGP on the same router, but they won't have anything to do
with one another (like ships in the night) unless you configure
redistribution explicitly.

Although I suppose it could also be applied to routed protocols as
well...I've just never heard it used for them before. :-)

BJ


----- Original Message -----
From: Fred Danson
To: [EMAIL PROTECTED]
Sent: Tuesday, April 03, 2001 11:50 PM
Subject: RE: EIGRP and OSPF


Wait a sec, I thought ships in the night meant that 2 ROUTED protocols are
running concurrently without knowledge of eachother. Running 2 routing
protocols has nothing to do with ships in the night, right?

Fred


>From: "Raul F. Fernandez" Reply-To: "Raul F. Fernandez" To: "Thomas" ,
>Subject: RE: EIGRP and OSPF Date: Tue, 3 Apr 2001 22:42:55 -0400
>
>Yes you can .....they are ships in the night. The never see each other.
>
>Raul
>
>-----Original Message----- From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of Thomas Sent: Tuesday, April 03,
>2001 10:14 PM To: [EMAIL PROTECTED] Subject: EIGRP and OSPF
>
>
>Hi All - Is it possible to have both EIGRP and OSPF installed on a single
>router? Just trying to get rid of the RIP here. Thanks All!
>Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to