Watch the wrap.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/c5krn/sw_rns/78_
5861.htm#xtocid135692
All of the 4.x Catalyst 5000 family supervisor engine software releases
require a minimum of 16-MB RAM installed on
your supervisor engine. All Catalyst 5000 family supervisor engines
with at least 16-MB DRAM fully support software
release 4.x.
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 10, 2001 5:26 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Sup I IOS Upgrade Will Not Take [7:113]
>
>
> Just checked my download folder & image 4.5(8) is 2.773 KB.
> The CCO had no
> minimum memory listed in the download information. If we were talking
> routers, 4 FLASH/ 8 RAM should be enough (even compressed).
>
> Any takers here ???
>
> Thanks
> Phil
>
> ----- Original Message -----
> From: "Jim Brown"
> To:
> Sent: Tuesday, April 10, 2001 9:07 PM
> Subject: RE: Sup I IOS Upgrade Will Not Take [7:113]
>
>
> > I thought the 4.5(8) image required 20MB? If not I wasted
> some money on
> > memory.
> >
> > -----Original Message-----
> > From: Circusnuts [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, April 10, 2001 3:49 PM
> > To: [EMAIL PROTECTED]
> > Subject: Sup I IOS Upgrade Will Not Take [7:113]
> >
> >
> > I'm upgrading my 5000 (Supervisor I WS-X5009) from 2.4(4)
> to 4.5.(8). I
> > checked the IOS size & type before trying to load (4 FLASH
> & 8 RAM), so
> I'm
> > pretty confident this part (IOS) is correct. When I load
> the image "Life
> Is
> > Grand," until the switch reboots to accept the new version.
> It seems as
> > though the new uploaded image has disappeared, the switch
> comes up in the
> > old
> > version. The new image does not register in the Sho
> Version & Sho Flash
> > output. This is a Sup I, so I cannot point the switch to a
> particular IOS
> > version (though it does not appear to be in FLASH) like
> possible with a
> Sup
> > II's.
> >
> > Any advice is welcome !!!
> >
> > Thanks Everyone
> > Phil
> >
> > PS- here is the Sho Ver
> >
> > CAT5K> shv er
> >
> > WS-C5000 Software, Version McpSW: 2.4(4) NmpSW: 2.4(4)
> > Copyright (c) 1995-1997 by Cisco Systems
> > NMP S/W compiled on Jan 23 1998, 11:54:52
> > MCP S/W compiled on Jan 23 1998, 12:14:52
> >
> > System Bootstrap Version: 2.1
> >
> > Hardware Version: 1.9 Model: WS-C5000 Serial #: 003627851
> >
> > Module Ports Model Serial # Hw Fw Fw1 Sw
> > ------ ----- ---------- --------- ------ ------- -------
> > --------------------
> > 1 2 WS-X5009 003627851 1.9 2.1 2.1(4) 2.4(4)
> > 2 12 WS-X5213A 006491956 2.0 1.4 2.4(4)
> >
> > Module DRAM FLASH NVRAM Used Available
> > ------ ------- ------- ------- ------- ---------
> > 1 8192K 4096K 256K 99K 157K
> >
> > Uptime is 0 day, 0 hour, 22 minutes
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=125&t=113
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
