The image requires 16MB of memory. The only upgrade SIMM available is a 16MB
module.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/c5krn/sw_rns/78_
5861.htm#xtocid135692
Extracted from link above:
Release 4.x Memory Requirements
These memory restrictions apply when running supervisor engine software
release 4.x:
All of the 4.x Catalyst 5000 family supervisor engine software releases
require a minimum of 16-MB RAM installed on your supervisor engine. All
Catalyst 5000 family supervisor engines with at least 16-MB DRAM fully
support software release 4.x.
-----Original Message-----
From: Circusnuts [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 10, 2001 4:26 PM
To: [EMAIL PROTECTED]
Subject: Re: Sup I IOS Upgrade Will Not Take [7:113]
Just checked my download folder & image 4.5(8) is 2.773 KB. The CCO had no
minimum memory listed in the download information. If we were talking
routers, 4 FLASH/ 8 RAM should be enough (even compressed).
Any takers here ???
Thanks
Phil
----- Original Message -----
From: "Jim Brown"
To:
Sent: Tuesday, April 10, 2001 9:07 PM
Subject: RE: Sup I IOS Upgrade Will Not Take [7:113]
> I thought the 4.5(8) image required 20MB? If not I wasted some money on
> memory.
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 10, 2001 3:49 PM
> To: [EMAIL PROTECTED]
> Subject: Sup I IOS Upgrade Will Not Take [7:113]
>
>
> I'm upgrading my 5000 (Supervisor I WS-X5009) from 2.4(4) to 4.5.(8). I
> checked the IOS size & type before trying to load (4 FLASH & 8 RAM), so
I'm
> pretty confident this part (IOS) is correct. When I load the image "Life
Is
> Grand," until the switch reboots to accept the new version. It seems as
> though the new uploaded image has disappeared, the switch comes up in the
> old
> version. The new image does not register in the Sho Version & Sho Flash
> output. This is a Sup I, so I cannot point the switch to a particular IOS
> version (though it does not appear to be in FLASH) like possible with a
Sup
> II's.
>
> Any advice is welcome !!!
>
> Thanks Everyone
> Phil
>
> PS- here is the Sho Ver
>
> CAT5K> shv er
>
> WS-C5000 Software, Version McpSW: 2.4(4) NmpSW: 2.4(4)
> Copyright (c) 1995-1997 by Cisco Systems
> NMP S/W compiled on Jan 23 1998, 11:54:52
> MCP S/W compiled on Jan 23 1998, 12:14:52
>
> System Bootstrap Version: 2.1
>
> Hardware Version: 1.9 Model: WS-C5000 Serial #: 003627851
>
> Module Ports Model Serial # Hw Fw Fw1 Sw
> ------ ----- ---------- --------- ------ ------- -------
> --------------------
> 1 2 WS-X5009 003627851 1.9 2.1 2.1(4) 2.4(4)
> 2 12 WS-X5213A 006491956 2.0 1.4 2.4(4)
>
> Module DRAM FLASH NVRAM Used Available
> ------ ------- ------- ------- ------- ---------
> 1 8192K 4096K 256K 99K 157K
>
> Uptime is 0 day, 0 hour, 22 minutes
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=126&t=113
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
