Can you send the config? It should work...it even works with Winroute on
cable modem.
Just for kicks check out this link. It's more about setting up for inbound
VPN but has some related reading in it.
http://www.cisco.com/warp/customer/cc/so/neso/sqso/eqso/dplip_in.htm
----- Original Message -----
From: "Circusnuts"
To:
Sent: Thursday, April 12, 2001 8:07 AM
Subject: Re: Passing IPSEC packets on dsl [7:321]
> Are you sure- my PIX 506 does it with no problem ???
>
> ----- Original Message -----
> From: Charles Manafa
> To:
> Sent: Thursday, April 12, 2001 8:37 AM
> Subject: RE: Passing IPSEC packets on dsl [7:321]
>
>
> > VPN does not work when IPSEC packets are NAT'd. One of the reasons why
> this
> > doesn't work is that packet authentication will fail when the packet is
> > NAT'd - the calculated hash will not match after NAT has been applied.
> >
> > Charles
> >
> > -----Original Message-----
> > From: Elijah Savage
> > To: [EMAIL PROTECTED]
> > Sent: 12/04/01 12:11
> > Subject: Passing IPSEC packets on dsl [7:321]
> >
> > All,
> >
> > I purchased a 1605 from eBay for my home lab. I decided to play with it
> > a bit on my DSL circuit. I am using NAT on this router, and everything
> > works fine except that now I can't vpn from the inside. Example, trying
> > to establish a vpn connection from a client on my local network in to
> > our vpn router at my place of employment. Of course with the netgear dsl
> > router it passes those ipsec packets. I was wondering if anyone has
> > tried this before and been able to make this happen.
> >
> > Thanks in advance.
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=344&t=321
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
