It's not learning about a static route, but learning (or knowing) about a
destination via a static route. Consider a static route with a higher
administrative value than a dynamic route. The dynamic route will be used
so long as it is received, but as soon as it fails the destination will now
be known via the static route.
Every router I've touched in the past two years have not required 'ip
routing' to be issued and were routing out of the box. I've used it in
troubleshooting "just in case" but never had it take affect (except when
playing with bridging where it had been disabled).
Just for grins and giggles I verified on a spare box, and 'no ip routing'
shows when it is set, and 'ip routing' does not, so that lets you know the
default values.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Tony van Ree"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I thought IP routing was "not on by default" as a matter of fact that
> thought can bring you unglued when trying to work out way some issues as
to
> why routers don't route IP. So I think (d) would be approriate.
>
> Why would a router "learn about a static route". So (c) goes out the
window.
>
> Maybe I have a twisted view?
>
> Teunis,
> Hobart, Tasmania
> Australia
>
>
>
> On Saturday, April 14, 2001 at 03:00:21 PM, Jason J. Roysdon wrote:
>
> > If 3 must be true, I'd say start with getting rid of the ones that
aren't:
> > Routing is enabled by default (may not have always been true, but as of
> > 12.x)
> > The command to enable routing is 'ip routing'
> >
> > That leaves you with three left. Of course, the exam could be wrong.
> a,c,e
> > sound correct though, just skimming and not thinking too hard.
> >
> > --
> > Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
> > List email: [EMAIL PROTECTED]
> > Homepage: http://jason.artoo.net/
> >
> >
> >
> > ""Victim"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Exam 1.11. Which three statements about Cisco Implementation of IP
> routing
> > > are ture:
> > >
> > > a. Routers can learn next hops dynamically
> > > b. IP routing is disabled by default on Cisco routers
> > > c. Routers can learn next hops through static routes
> > > d. Entering ip route in global configuration mode enables IP routing
> > > e. Routers learn next hops by receiving periodic updates from other
> > routers
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
>
> --
> www.tasmail.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=871&t=640
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
