1) I guess you enable the fastethernet port in the running
configuration. You have to
shutdown the port, so the port will administrative shut down and line
protocol down.
2) Line protocol will up if there is any phyiscal connection attached to
Fastethernet.
Becasue the port in your router will detect keepalive signal, when it
detected, it will
up. You can type no keepalive under interface configuration, the
ethernet interface
will keep up even no physical connection. You have to enable the
interface, of courese.
Hope this help
Vincent Chong
""md. nazri"" hi all,
> got one question regarding FastEthernet on Cisco 2620..
> why the status showed FastEthernet is up, Line protocol down although the
> cable was pulled out from the port...in what cases the port will down..any
> help appreciated
>
> tq
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1829&t=1828
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
