if it's true..that's a good indicator for hardware health checkup.....
another Q, if we set the FE to be full-duplex, does it mean we get 100meg
for tx and 100meg for rx, so total 200meg for a connection...?
----- Original Message -----
From: "Priscilla Oppenheimer"
To:
Sent: Thursday, April 26, 2001 9:07 AM
Subject: Re: FastEthernet is up, Line protocol down [7:1828]
> I don't think it's just Fast Ethernet. I've seen "Slow" Ethernet report
> that the interface is up, down when nothing was attached. It seems to just
> be an indication that the interface passed a hardware check.
>
> Priscilla
>
> At 08:21 PM 4/25/01, md. nazri wrote:
> >thanks for the answer...
> >i understand that LP will down if no connection attach, but why FE still
up,
> >does it up forever until we shut it down? Does it apply the same to
> >Ethernet..?
> >----- Original Message -----
> >From: "Vincent Chong"
> >To:
> >Sent: Wednesday, April 25, 2001 3:48 PM
> >Subject: Re: FastEthernet is up, Line protocol down [7:1828]
> >
> >
> > > 1) I guess you enable the fastethernet port in the running
> > > configuration. You have to
> > > shutdown the port, so the port will administrative shut down and
line
> > > protocol down.
> > >
> > > 2) Line protocol will up if there is any phyiscal connection
attached
> >to
> > > Fastethernet.
> > > Becasue the port in your router will detect keepalive signal, when
it
> > > detected, it will
> > > up. You can type no keepalive under interface configuration,
the
> > > ethernet interface
> > > will keep up even no physical connection. You have to enable the
> > > interface, of courese.
> > >
> > > Hope this help
> > > Vincent Chong
> > >
> > >
> > >
> > > ""md. nazri"" hi all,
> > > > got one question regarding FastEthernet on Cisco 2620..
> > > > why the status showed FastEthernet is up, Line protocol down
although
> >the
> > > > cable was pulled out from the port...in what cases the port will
> >down..any
> > > > help appreciated
> > > >
> > > > tq
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> ________________________
>
> Priscilla Oppenheimer
> http://www.priscilla.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2043&t=1828
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
