thanks for the answer...
i understand that LP will down if no connection attach, but why FE still up,
does it up forever until we shut it down? Does it apply the same to
Ethernet..?
----- Original Message -----
From: "Vincent Chong"
To:
Sent: Wednesday, April 25, 2001 3:48 PM
Subject: Re: FastEthernet is up, Line protocol down [7:1828]
> 1) I guess you enable the fastethernet port in the running
> configuration. You have to
> shutdown the port, so the port will administrative shut down and line
> protocol down.
>
> 2) Line protocol will up if there is any phyiscal connection attached
to
> Fastethernet.
> Becasue the port in your router will detect keepalive signal, when it
> detected, it will
> up. You can type no keepalive under interface configuration, the
> ethernet interface
> will keep up even no physical connection. You have to enable the
> interface, of courese.
>
> Hope this help
> Vincent Chong
>
>
>
> ""md. nazri"" hi all,
> > got one question regarding FastEthernet on Cisco 2620..
> > why the status showed FastEthernet is up, Line protocol down although
the
> > cable was pulled out from the port...in what cases the port will
down..any
> > help appreciated
> >
> > tq
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1997&t=1828
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
