Do a "sho ver" command and check the last statement. You need to check where
your IOS is loading from. Most often I use 0x2102. You may find that yours
states 0x2142.
HTH
Later,
Chris
-----Original Message-----
From: Chan [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 25, 2001 11:24 AM
To: [EMAIL PROTECTED]
Subject: RE:Can't copy run to start [7:1880]
Hi All
After i have copy my running config to start using "copy run start" then
reload my router,but when i do a sh run or sh start the config is
gone.Can anyone advise on this.
Thank you
Regards
Chan
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1894&t=1880
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
