Even with 0x2142 he should still have a startup config - even though it did
not load. There may be a hardware problem here with the NVRAM. Might be time
to call the TAC. BTW What model router?
> -----Original Message-----
> From: Kane, Christopher A. [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 25, 2001 11:18 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Can't copy run to start [7:1880]
>
>
> Do a "sho ver" command and check the last statement. You need
> to check where
> your IOS is loading from. Most often I use 0x2102. You may
> find that yours
> states 0x2142.
>
> HTH
> Later,
> Chris
>
>
> -----Original Message-----
> From: Chan [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 25, 2001 11:24 AM
> To: [EMAIL PROTECTED]
> Subject: RE:Can't copy run to start [7:1880]
>
>
> Hi All
>
> After i have copy my running config to start using "copy run
> start" then
> reload my router,but when i do a sh run or sh start the config is
> gone.Can anyone advise on this.
>
> Thank you
>
> Regards
> Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1898&t=1880
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
