If this were the case, than show config & sho run should give different
result or an NVRAM error message should appear when rebooting. I believe
we'd have more evidence.
We had a tools guy who wrote a script that somehow Copy Run Star-ed about
every 5 minutes & he burned the NVRAM out of an entire area of overseas
routers in less than a month. If I recall, the damage was very very
noticeable, not just reloads or config changes
Phil
----- Original Message -----
From: Daniel Cotts
To:
Sent: Wednesday, April 25, 2001 12:34 PM
Subject: RE: Can't copy run to start [7:1880]
> Even with 0x2142 he should still have a startup config - even though it
did
> not load. There may be a hardware problem here with the NVRAM. Might be
time
> to call the TAC. BTW What model router?
>
> > -----Original Message-----
> > From: Kane, Christopher A. [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, April 25, 2001 11:18 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: Can't copy run to start [7:1880]
> >
> >
> > Do a "sho ver" command and check the last statement. You need
> > to check where
> > your IOS is loading from. Most often I use 0x2102. You may
> > find that yours
> > states 0x2142.
> >
> > HTH
> > Later,
> > Chris
> >
> >
> > -----Original Message-----
> > From: Chan [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, April 25, 2001 11:24 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE:Can't copy run to start [7:1880]
> >
> >
> > Hi All
> >
> > After i have copy my running config to start using "copy run
> > start" then
> > reload my router,but when i do a sh run or sh start the config is
> > gone.Can anyone advise on this.
> >
> > Thank you
> >
> > Regards
> > Chan
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1932&t=1880
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
