On the DCE end:
globably define:
frame-relay switching
on the interface define:
encapsulation frame-relay
frame-relay intf-type dce
clock rate x
ip address x.x.x.x x.x.x.x
frame-relay map ip x.x.x.x broadcast
On the DTE end interface:
encapsulation frame-relay
ip address x.x.x.x x.x.x.x
That should work for you. I've been using POS instead of serial lately so
my commands might be a little off, but I think it should work.
At 06:51 PM 4/26/01, you wrote:
>ive been dying now for two days trying to get frame relay going between 2
>2501 routers.
>
>I have tried everything i know to do, and looked at 900 different places and
>i must just be missing something.
>
>can anyone give me the exact steps to configure this.
>
>I have 2 2501 routers connected together with v.35 cable.
>
>i can get PPP and HDLC working fine but frame-relay just doesnt want to work
>for me.
>
>im also running ios 12.1(7) enterprise if that helps.
>
>--
>Justin M. Clark
>MCSE 4.0, MCSE 2000
>CCNA, CCDA
>[EMAIL PROTECTED]
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2211&t=2204
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
