You need to creat DLCI and link WAN IP to DLCI so that routing can take
place. DLCI on DTE and DCE shall be have same no.
----- Original Message -----
From: "Curtis Call"
To:
Sent: Saturday, April 28, 2001 7:44 AM
Subject: Re: Help with frame-relay [7:2204]
> The config I provided works fine for me. I believe the DTE and DCE can be
> determined on a per-interface basis. You'll notice that I'm not actually
> "switching" via the frame-relay route command, but the frame-relay switch
> command is required if you want to use the frame-relay intf-type dce
command.
>
> At 03:52 PM 4/27/01, you wrote:
> >But as I know, you should have a cisco router acted as "frame-relay
switch"
> >between
> >them. It seems a router can not acted as DTE and DCE at the same time. Am
I
> >correct?
> >
> >Curtis Call wrote:
> >
> > > On the DCE end:
> > > globably define:
> > > frame-relay switching
> > > on the interface define:
> > > encapsulation frame-relay
> > > frame-relay intf-type dce
> > > clock rate x
> > > ip address x.x.x.x x.x.x.x
> > > frame-relay map ip x.x.x.x broadcast
> > >
> > > On the DTE end interface:
> > > encapsulation frame-relay
> > > ip address x.x.x.x x.x.x.x
> > >
> > > That should work for you. I've been using POS instead of serial
lately
> so
> > > my commands might be a little off, but I think it should work.
> > >
> > > At 06:51 PM 4/26/01, you wrote:
> > > >ive been dying now for two days trying to get frame relay going
between
> 2
> > > >2501 routers.
> > > >
> > > >I have tried everything i know to do, and looked at 900 different
places
> >and
> > > >i must just be missing something.
> > > >
> > > >can anyone give me the exact steps to configure this.
> > > >
> > > >I have 2 2501 routers connected together with v.35 cable.
> > > >
> > > >i can get PPP and HDLC working fine but frame-relay just doesnt want
to
> >work
> > > >for me.
> > > >
> > > >im also running ios 12.1(7) enterprise if that helps.
> > > >
> > > >--
> > > >Justin M. Clark
> > > >MCSE 4.0, MCSE 2000
> > > >CCNA, CCDA
> > > >[EMAIL PROTECTED]
> > > >FAQ, list archives, and subscription info:
> > > >http://www.groupstudy.com/list/cisco.html
> > > >Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2533&t=2204
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
