The config I provided works fine for me. I believe the DTE and DCE can be
determined on a per-interface basis. You'll notice that I'm not actually
"switching" via the frame-relay route command, but the frame-relay switch
command is required if you want to use the frame-relay intf-type dce command.
At 03:52 PM 4/27/01, you wrote:
>But as I know, you should have a cisco router acted as "frame-relay switch"
>between
>them. It seems a router can not acted as DTE and DCE at the same time. Am I
>correct?
>
>Curtis Call wrote:
>
> > On the DCE end:
> > globably define:
> > frame-relay switching
> > on the interface define:
> > encapsulation frame-relay
> > frame-relay intf-type dce
> > clock rate x
> > ip address x.x.x.x x.x.x.x
> > frame-relay map ip x.x.x.x broadcast
> >
> > On the DTE end interface:
> > encapsulation frame-relay
> > ip address x.x.x.x x.x.x.x
> >
> > That should work for you. I've been using POS instead of serial lately
so
> > my commands might be a little off, but I think it should work.
> >
> > At 06:51 PM 4/26/01, you wrote:
> > >ive been dying now for two days trying to get frame relay going between
2
> > >2501 routers.
> > >
> > >I have tried everything i know to do, and looked at 900 different places
>and
> > >i must just be missing something.
> > >
> > >can anyone give me the exact steps to configure this.
> > >
> > >I have 2 2501 routers connected together with v.35 cable.
> > >
> > >i can get PPP and HDLC working fine but frame-relay just doesnt want to
>work
> > >for me.
> > >
> > >im also running ios 12.1(7) enterprise if that helps.
> > >
> > >--
> > >Justin M. Clark
> > >MCSE 4.0, MCSE 2000
> > >CCNA, CCDA
> > >[EMAIL PROTECTED]
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2351&t=2204
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
