Umm, what?
c1605r_unused#sh ip int brief
Interface IP-Address OK? Method Status
Protocol
Ethernet0 unassigned YES NVRAM administratively down
down
Ethernet1 192.168.45.254 YES NVRAM up
up
Loopback0 10.16.5.1 YES NVRAM up
up
c1605r_unused#ping 192.168.45.254
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.45.254, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Chuck Larrieu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Guys, my own experiments indicate that you can't ping yourself on an
> ethernet interface either.
>
> But an extended ping sourcing from another interface works fine.
>
> Something else that is bothering me - why do you need to ping yourself?
> There are plenty of tools that tell you if an interface is up, and if it
is
> an ip interface.
>
> Sh int
> Sh ip int
> Sh ip int brief
>
> I generally think of ping as a test of routing, not a test of interfaces
> being up. Is there another reason I'm missing?
>
> Chuck
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
> Brian Dennis
> Sent: Monday, May 07, 2001 4:34 PM
> To: [EMAIL PROTECTED]
> Subject: RE: cannot ping myself [7:3498]
>
> You don't have a frame-relay map statement to yourself. If you want to
ping
> yourself you need to add a map statement (i.e. frame-relay map ip
10.10.10.1
> 16).
>
> Brian
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > [EMAIL PROTECTED]
> > Sent: Monday, May 07, 2001 3:49 PM
> > To: [EMAIL PROTECTED]
> > Subject: cannot ping myself [7:3498]
> >
> >
> > #sh run
> > ...
> > !
> > interface Serial1
> > description Enlace al San Alfonso (BellSouth)
> > ip address 10.10.10.1 255.255.255.0
> > no ip directed-broadcast
> > encapsulation frame-relay IETF
> > no fair-queue
> > frame-relay interface-dlci 16
> > frame-relay lmi-type ansi
> > !
> > ...
> > #ping 10.10.10.1
> >
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
> > .....
> > Success rate is 0 percent (0/5)
> >
> > (pinging 10.10.10.1 from other box works, but by the own router doesn't)
> >
> > What can be happening?
> >
> > Thanks,
> > HoraPe
> > ---
> > Horacio J. Peqa
> > [EMAIL PROTECTED]
> > [EMAIL PROTECTED]
> > [EMAIL PROTECTED]
> > [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3531&t=3498
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
