u need config ur interface as point to point, cisco serial interface default
is
multipoint.
Xiao
"[EMAIL PROTECTED]" wrote:
> #sh run
> ...
> !
> interface Serial1
> description Enlace al San Alfonso (BellSouth)
> ip address 10.10.10.1 255.255.255.0
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no fair-queue
> frame-relay interface-dlci 16
> frame-relay lmi-type ansi
> !
> ...
> #ping 10.10.10.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
>
> (pinging 10.10.10.1 from other box works, but by the own router doesn't)
>
> What can be happening?
>
> Thanks,
> HoraPe
> ---
> Horacio J. Peqa
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3536&t=3498
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
