Well if they really need to be bound to 1 ip, I suspect multilink pp is
the way to go. Alternatively, you could just point the same static routes
at all 3 and turn off caching if you really want to.
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 15 May 2001, Al Smith wrote:
> Colleagues,
>
> I am currently trying to multiplex / bind 3 parallel T1 clear channel
> circuits.
> The circuits will be terminating on a 7206 router on an 8 port multi
> channel T1 card.
>
> My question is how do I bind the 3 T1s together to get the total aggregate
> bandwidth of 3 T1s.
> I have only found info on Inverse multiplexing for ATM which is not what I
> am trying to achieve.
> what I have is strictly 3 Point to Point T1 circuits using PPP.
>
> Albert Smith
> Lucent Technologies
> System Engineer, CCNP MCSE
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4631&t=4625
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
