What is to be gained by using an inverse mux ? How much extra overhead is
caused by this rather than running in inversed mode?
""Jon Wagner"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Take a look at this config and see if it work for you:
> http://www.cisco.com/warp/public/131/7.html
>
>
> -----Original Message-----
> From: Al Smith [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 15, 2001 8:57 PM
> To: [EMAIL PROTECTED]
> Subject: How to Multiplex 3 T1s [7:4625]
>
>
> Colleagues,
>
> I am currently trying to multiplex / bind 3 parallel T1 clear channel
> circuits.
> The circuits will be terminating on a 7206 router on an 8 port multi
> channel T1 card.
>
> My question is how do I bind the 3 T1s together to get the total aggregate
> bandwidth of 3 T1s.
> I have only found info on Inverse multiplexing for ATM which is not what I
> am trying to achieve.
> what I have is strictly 3 Point to Point T1 circuits using PPP.
>
> Albert Smith
> Lucent Technologies
> System Engineer, CCNP MCSE
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5363&t=4625
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
