So what you are saying is use a 14 TerraHertz gamma ray deionizing 12 bolt
chrome ray gun is the way to end that connection. Am I wrong.
Don
----- Original Message -----
From: "Frank Kim"
To:
Sent: Thursday, May 24, 2001 10:36 AM
Subject: Re: CLARIFICATION: 2511 with reverse-telnet [7:5686]
> Let's make it simple. Let's ignore the factor that there is a 2501
> attached to a 2511's line 1. Just plain simple. You have:
>
> 1) 2511 router with e0 = 192.168.1.1/24
> 2) an NT box with ip address of 192.168.1.2/24
>
> Assuming that you have configured line 1 on the 2511 with transport input
> all and the rest. You sit on your NT box and u telnet to 192.168.1.1
> 2001. Now you want to kill that telnet session. How will you do it
> without closing the telnet application n or hitting a disconnect on the
> telnet application nor getting into the 2511 and do a clear line 1. Hope
> you know where I'm getting at.
>
>
> -Frank
>
>
> On Thu, 24 May 2001, Erick B. wrote:
>
> > Your telnet session is terminated at the 2511 but the
> > 2511 redirects you out line 1 directly, so your not
> > getting a console/terminal session from the 2511. If
> > you telnet to the 2511 then out line 1, then your
> > using the 2511 as a console/terminal session so it
> > behaves differently. This is the way I understand it
> > and best I can explain it.
> >
> > --- Frank Kim wrote:
> > > Erick,
> > > When you telnet into a 2511's ethernet address via
> > > port 2001 which as the
> > > 2501 attached to it, you are actually on the console
> > > of the
> > > 2501. Pressing exit, logout, or quit at that poing
> > > does not terminate
> > > your tcp session to the 2511 but it only bring you
> > > to the "Press RETURN to
> > > get started." screen of the 2501. I want to be able
> > > to terminate the tcp
> > > session to the 2511 without closing the telnet
> > > application.
> > >
> > > -Frank
> > >
> > >
> > > On Thu, 24 May
> > > 2001, Erick B. wrote:
> > >
> > > > I sent a reply to this earlier. This is a
> > > > telnet-client issue (your windows telnet client).
> > > The
> > > > windows telnet client has a disconnect option that
> > > > will disconnect the session and keep the telnet
> > > window
> > > > open, or you can click on the X or alt-f4 the
> > > window.
> > > > You can also do 'logout' on router which should
> > > > disconnect it.
> > > >
> > > > If you are looking to suspend and resume your
> > > telnet
> > > > session, then the windows client will not do this.
> > > You
> > > > will have to open multiple telnet windows, or
> > > telnet
> > > > into the 2511 and reverse telnet from there. When
> > > > you're telneting from the 2511 the 2511 lets you
> > > > suspend/resume session by using the escape
> > > sequence.
> > > >
> > > > If you're looking for a control-] style
> > > suspend/resume
> > > > which is common in unix platforms then you'll have
> > > to
> > > > look around for a unix-like telnet client for
> > > windows
> > > > that has that functionality.
> > > >
> > > > Ie:
> > > >
> > > > I telnet'd to a cisco router from a unix box, and
> > > hit
> > > > control-] and got this:
> > > >
> > > > telnet> ?
> > > > Commands may be abbreviated. Commands are:
> > > >
> > > > close close current connection
> > > > display display operating parameters
> > > > mode try to enter line or character
> > > mode
> > > > ('mode ?' for more)
> > > > open connect to a site
> > > > quit exit telnet
> > > > send transmit special characters ('send
> > > ?'
> > > > for more)
> > > > set set operating parameters ('set ?'
> > > for
> > > > more)
> > > > unset unset operating parameters ('unset
> > > ?'
> > > > for more)
> > > > status print status information
> > > > toggle toggle operating parameters
> > > ('toggle
> > > > ?' for more)
> > > > slc change state of special charaters
> > > > ('slc ?' for more)
> > > > ! run a TI command
> > > > environ change environment variables
> > > ('environ
> > > > ?' for more)
> > > > ? print help information
> > > > telnet>
> > > >
> > > > Erick
> > > >
> > > > --- Frank Kim wrote:
> > > > > Phil,
> > > > > Yes you have misunderstood once again. Let me
> > > > > clarify. I sit on an NT
> > > > > box. I use my mouse to click on start, then
> > > run,
> > > > > then i type in: telnet
> > > > > 192.168.1.1 2001 which brings me straight to the
> > > > > console of my 2501. Even
> > > > > I am accessing my 2501 via a TCP session over
> > > the
> > > > > 2511, but it looks as if
> > > > > the 2511 isn't there. Therefore, you can not
> > > use
> > > > > alias or type exit to
> > > > > get out of that session. Because whatever
> > > > > 'character' you input into the
> > > > > screen is for the 2501's console, not the 2511.
> > > So
> > > > > again, if a user has
> > > > > made a telnet session to 192.168.1.1 2001, how
> > > can
> > > > > he exit out of that
> > > > > telnet session WITHOUT having to 'close' the
> > > telnet
> > > > > application? Once
> > > > > again, the 'exit' command nor the ctrl-shift-6 x
> > > > > cannot be applied in this
> > > > > case. Let me know if I'm still confusing you.
> > > > >
> > > > > -Frank
> > > > >
> > > > >
> > > > > On Thu, 24 May 2001, Circusnuts wrote:
> > > > >
> > > > > > OK- you have NT client (Telnet)--2511--
> > > > > async--2501. You have opened a
> > > > > > session with the 2511, to access the 2501 via
> > > > > async line 2001 (through the
> > > > > > first physical port on your octal cable).
> > > Your
> > > > > commands in the 2511
> > > > > (Telnet
> > > > > > Hyper Term Window) only effect your
> > > relationship
> > > > > with the 2511/2501 or
> > > > > > direct configurations to the 2511. An Alias
> > > only
> > > > > gives you a custom
> > > > > > shortcut command, that you dictate (ex: Show
> > > IP
> > > > > BGP Neighbors might be made
> > > > > > to work as SIBN). The best way to exit the
> > > 2511
> > > > > Telnet (& leave the 2511
> > > > > > connection up) is to simply close your Telnet
> > > > > window. You can shortcut the
> > > > > > exit statement, maybe an Alias of "E."
> > > > > >
> > > > > > Have I misconstrued ???
> > > > > > Phil
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: Frank Kim
> > > > > > To:
> > > > > > Sent: Thursday, May 24, 2001 1:51 AM
> > > > > > Subject: CLARIFICATION: 2511 with
> > > reverse-telnet
> > > > > [7:5686]
> > > > > >
> > > > > >
> > > > > > > Okay guys. I am really sorry for the waste
> > > of
> > > > > bandwidth. But so far, I
> > > > > > > think I have been misunderstood. Here is
> > > what I
> > > > > got:
> > > > > > >
> > > > > > > 1) 2511 with e0 = 192.168.1.1/24
> > > > > > > 2) one 2501, console's port is attached to
> > > line
> > > > > 1 of 2511
> > > > > > > 3) one NT box with ip of 192.168.1.2/24
> > > > > > >
> > > > > > > I sit on my NT box and I initiate a telnet
> > > to
> > > > > 192.168.1.1 using port
> > > > > > > 2001. Remember, I am not doing it from a
> > > > > router. So ctrl-shift-6 x will
> > > > > > > not suspend my session. What I would like
> > > to do
> > > > > is to be able to exit
> > > > > > > from the telnet session by typing a
> > > keystroke
> > > > > such as control-] or
> > > > > > > so. And one more thing, typing 'exit' does
> > > not
> > > > > work.
> > > > > > >
> > > > > > > I apologize for all misunderstanding.
> > > Thanks
> > > > > for any help.
> > > >
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Yahoo! Auctions - buy the things you want at great
> > > prices
> > > > http://auctions.yahoo.com/
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Auctions - buy the things you want at great prices
> > http://auctions.yahoo.com/
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5785&t=5686
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
