Hi RamG,
tell us more about to what the Tokenring Interface is connected to.
a MAU ? a TR-Switch ? Is the port you want to connect to and the cabling
fine and does it support the configured 16MHz TokenRing ?
Reinhold
On Mon, 28 May 2001, RamG wrote:
> Hello Gang - I am having problem bring up TR int. Following is the output.
>
> R2502#show interface tokenring0
> TokenRing0 is initializing, line protocol is down
> Hardware is TMS380, address is 0000.30ba.4a52 (bia 0000.30ba.4a52)
> MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, rely 255/255, load 1/255
> Encapsulation SNAP, loopback not set, keepalive set (10 sec)
> ARP type: SNAP, ARP Timeout 04:00:00
> Ring speed: 16 Mbps
> Duplex: half
> Mode: Classic token ring station
> Group Address: 0x00000000, Functional Address: 0x08000000
> Ethernet Transit OUI: 0x000000
> Last input never, output never, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 0 packets output, 0 bytes, 0 underruns
> 0 output errors, 0 collisions, 54 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 59 transitions
>
> R2502#show config
> Using 774 out of 32762 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> service udp-small-servers
> service tcp-small-servers
> !
> hostname R2502
> !
> no logging console
> enable password ram
> !
> ip subnet-zero
> no ip domain-lookup
> !
> !
> !
> interface Serial0
> bandwidth 64
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial1
> bandwidth 64
> ip address 10.1.5.1 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> !
> interface TokenRing0
> no ip address
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> ring-speed 16
> !
> ip classless
> !
> !
> line con 0
> transport input none
> line aux 0
> transport input all
> line vty 0 4
> login
> !
> end
>
> Thanks / RamG
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6143&t=6112
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
