on a regular basis.
today a funny orange light started blinking on a really expensive L# module
for a  Cat 4k =(

Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th Street
New York, NY
10001
Cell:    (516) 782.1535
Desk: (646) 792.2395
Mail: [EMAIL PROTECTED]
Fax:    (646) 792.2396
----- Original Message -----
From: "David Chandler" 
To: 
Sent: Tuesday, May 29, 2001 8:22 AM
Subject: Re: TR Int Errr [7:6112]


> 1. Swap the cables between the 2502 and 2504 (if you haven't already)
> 2. Swap the ports on the MAU.
>
> If 1 and 2 do not work get rid of the 2502.
>
> Even Cisco's hardware breaks.
>
> HTH
>
> DaveC
>
>
> RamG wrote:
> >
> > I have TWO routers with TR interface - 2502/2504.  I am using IBM MAU.
> > Connected both the routers TR int to MAU port 1 & 2.  Router 2504 TR Int
is
> > up and running fine.  I am having problem with 2502.  There is no fault
on
> > MAU.  What else could be the problem?  I even changed ring speed on
2502.
> > Yet it is still initializing and protocol is DOWN.  I even tried
changing
> > media filters.  Still no luck in troubleshooting.  I am worried is my TR
> int
> > gone for good, if so, then I will have to report the defect to the
seller
> > ASAP.  Would appreciate any help.
> >
> > Hello Gang - I am having problem bring up TR int.  Following is the
output.
> > >
> > > R2502#show interface tokenring0
> > > TokenRing0 is initializing, line protocol is down
> > >   Hardware is TMS380, address is 0000.30ba.4a52 (bia 0000.30ba.4a52)
> > >   MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, rely 255/255, load
1/255
> > >   Encapsulation SNAP, loopback not set, keepalive set (10 sec)
> > >   ARP type: SNAP, ARP Timeout 04:00:00
> > >   Ring speed: 16 Mbps
> > >   Duplex: half
> > >   Mode: Classic token ring station
> > >   Group Address: 0x00000000, Functional Address: 0x08000000
> > >   Ethernet Transit OUI: 0x000000
> > >   Last input never, output never, output hang never
> > >   Last clearing of "show interface" counters never
> > >   Queueing strategy: fifo
> > >   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> > >   5 minute input rate 0 bits/sec, 0 packets/sec
> > >   5 minute output rate 0 bits/sec, 0 packets/sec
> > >      0 packets input, 0 bytes, 0 no buffer
> > >      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> > >      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> > >      0 packets output, 0 bytes, 0 underruns
> > >      0 output errors, 0 collisions, 54 interface resets
> > >      0 output buffer failures, 0 output buffers swapped out
> > >      59 transitions
> > >
> > > R2502#show config
> > > Using 774 out of 32762 bytes
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > service udp-small-servers
> > > service tcp-small-servers
> > > !
> > > hostname R2502
> > > !
> > > no logging console
> > > enable password ram
> > > !
> > > ip subnet-zero
> > > no ip domain-lookup
> > > !
> > > !
> > > !
> > > interface Serial0
> > >  bandwidth 64
> > >  no ip address
> > >  no ip directed-broadcast
> > >  encapsulation ppp
> > >  no ip route-cache
> > >  no ip mroute-cache
> > > !
> > > interface Serial1
> > >  bandwidth 64
> > >  ip address 10.1.5.1 255.255.255.0
> > >  no ip directed-broadcast
> > >  encapsulation ppp
> > >  no ip route-cache
> > >  no ip mroute-cache
> > > !
> > > interface TokenRing0
> > >  no ip address
> > >  no ip directed-broadcast
> > >  no ip route-cache
> > >  no ip mroute-cache
> > >  ring-speed 16
> > > !
> > > ip classless
> > > !
> > > !
> > > line con 0
> > >  transport input none
> > > line aux 0
> > >  transport input all
> > > line vty 0 4
> > >  login
> > > !
> > > end
> >
> > Thanks  /  RamG
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6305&t=6112
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to