Is there anything else plugged into your MAU (a PC or anything)? TR doesn't 
want to come up if its the only device in the ring, since, well, you can't 
have a 1-station ring. :-)

HTH,
doctorcisco


>From: "RamG" 
>Reply-To: "RamG" 
>To: [EMAIL PROTECTED]
>Subject: TR Int Errr [7:6112]
>Date: Mon, 28 May 2001 10:39:46 -0400
>
>Hello Gang - I am having problem bring up TR int.  Following is the output.
>
>R2502#show interface tokenring0
>TokenRing0 is initializing, line protocol is down
>   Hardware is TMS380, address is 0000.30ba.4a52 (bia 0000.30ba.4a52)
>   MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, rely 255/255, load 1/255
>   Encapsulation SNAP, loopback not set, keepalive set (10 sec)
>   ARP type: SNAP, ARP Timeout 04:00:00
>   Ring speed: 16 Mbps
>   Duplex: half
>   Mode: Classic token ring station
>   Group Address: 0x00000000, Functional Address: 0x08000000
>   Ethernet Transit OUI: 0x000000
>   Last input never, output never, output hang never
>   Last clearing of "show interface" counters never
>   Queueing strategy: fifo
>   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
>   5 minute input rate 0 bits/sec, 0 packets/sec
>   5 minute output rate 0 bits/sec, 0 packets/sec
>      0 packets input, 0 bytes, 0 no buffer
>      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
>      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
>      0 packets output, 0 bytes, 0 underruns
>      0 output errors, 0 collisions, 54 interface resets
>      0 output buffer failures, 0 output buffers swapped out
>      59 transitions
>
>R2502#show config
>Using 774 out of 32762 bytes
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>service udp-small-servers
>service tcp-small-servers
>!
>hostname R2502
>!
>no logging console
>enable password ram
>!
>ip subnet-zero
>no ip domain-lookup
>!
>!
>!
>interface Serial0
>  bandwidth 64
>  no ip address
>  no ip directed-broadcast
>  encapsulation ppp
>  no ip route-cache
>  no ip mroute-cache
>!
>interface Serial1
>  bandwidth 64
>  ip address 10.1.5.1 255.255.255.0
>  no ip directed-broadcast
>  encapsulation ppp
>  no ip route-cache
>  no ip mroute-cache
>!
>interface TokenRing0
>  no ip address
>  no ip directed-broadcast
>  no ip route-cache
>  no ip mroute-cache
>  ring-speed 16
>!
>ip classless
>!
>!
>line con 0
>  transport input none
>line aux 0
>  transport input all
>line vty 0 4
>  login
>!
>end
>
>Thanks  /  RamG
>FAQ, list archives, and subscription info: 
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6153&t=6112
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to