Still on a quest for a low-cost router that will run ISL and 802.1Q.
There's a used 2621 that I may be able to get. Would it run ISL and 802.1Q
and how would I know? I know the hardware supports it. How about the
software?
Here's all I know about it:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
System image file is "flash:c2600-is-mz.120-7.T.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 32768K/8192K bytes of
memory.
Processor board ID JAB04230ASH (1606890861)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Thanks and sorry for all the dumb questions!
Priscilla
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7472&t=7256
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
