That would be a great router... It has lots of interfaces too!!! (BRI, 2
serial)... And lots of memory
On the 262x, you need IP PLUS, which is already on this router...
-Nate
"Priscilla Oppenheimer" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Still on a quest for a low-cost router that will run ISL and 802.1Q.
> There's a used 2621 that I may be able to get. Would it run ISL and 802.1Q
> and how would I know? I know the hardware supports it. How about the
> software?
>
> Here's all I know about it:
>
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE
> (fc2)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Tue 07-Dec-99 02:21 by phanguye
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> System image file is "flash:c2600-is-mz.120-7.T.bin"
>
> cisco 2621 (MPC860) processor (revision 0x102) with 32768K/8192K bytes of
> memory.
> Processor board ID JAB04230ASH (1606890861)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> Basic Rate ISDN software, Version 1.1.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 2 Serial(sync/async) network interface(s)
> 1 ISDN Basic Rate interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
>
> Thanks and sorry for all the dumb questions!
>
> Priscilla
>
> ________________________
>
> Priscilla Oppenheimer
> http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7478&t=7256
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
