Hi Remmert,
I thought you could use HSRP to load balance as well as for redundancy......
Here's an link showing how to set this up........
http://www.cisco.com/warp/public/619/7.html
However, using HSRP for load sharing is only useful in certain
situations......
Mike W.
"Remmert Veen" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Cheeyong,
>
> HSRP indeed won't do the trick, this is a redundancy mechanism.
>
> To enable load-sharing, check what routing protocol you are running. OSPF
> and EIGRP are able to do equal-cost load-sharing by default. If the 2
serial
> links are unequal cost, I'd recommend EIGRP to provision unequal-cost
> load-sharing.
>
> Your network diagram unfortunately isn't too clear. From which network to
> which network do you want to load-balance?
>
> I hope this helps for now, let me know if I can further help you out.
>
> Regards,
> Remmert
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7888&t=7687
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
