Can Use Floating routes to do the Load balancing on the Links.
giving different metrics to each Link.
Namish
MCSE,CCNA,CCNP
Rashid Lohiya :
> Just out of curiosity, would 2 static routes with same metrics not do
> the
> trick?
> One packet out one interface and the other out the 2nd?
> Not sure, just wondering! Or will only the first static get all the
> packets?
>
> Rashid Lohiya
> [EMAIL PROTECTED]
> 020 8509 2990
> 07785 362626
> www.pioneer-computers.com
> London UK
>
>
> "Tay Chee Yong" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all,
> >
> > I would like to perform load sharing 2 serial links on a Cisco 2501,
> how
> > should I go about doing that?? I had thought of using HSRP, but I
> think it
> > is not applicable in this scenario. Any advise?? Below is the network
> > diagram.
> >
> > (10.10.10.1/24)
> > | E0
> > -------------------------
> > | Cisco 2501 |
> > -------------------------
> > / S0 \ S1
> > 2Mbps / \ 2Mbps
> > / S0 \ S0
> > ---------------- -----------------
> > | 2501 | | 2501 |
> > ----------------- -----------------
> > | E0 | E0
> > (192.168.1.1/24) (192.154.10.1/24)
> >
> > Thank you and regards,
> > Cheeyong
This mail sent through : http://mail.sify.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7946&t=7687
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
