Hey Gang,
I am wondering if anyone out there has had any problem with the VIP4-80s for
7500 router. I currently am unable to get the VIP recognized by the router.
When I look at the diagbus for that slot I receive the following
information.
Slot 5:
Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0
Internal Instruction Error, Microcode Status 0x0
Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded
Board is disabled
Pending I/O Status: None
EEPROM format version 1
VIP4-80 RM7000 controller, HW rev 2.01, board revision A0
Serial number: 18547357 Part number: 73-3143-03
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00
0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x201 Insertion time: 0x8AE0 (00:18:14 ago)
VIP Controller Memory Size: Unknown
How do I get this VIP to be analyized, enabled, memory recognized, and the
Microcode status to 0X4?
Any help would be greatly appreciated.
Thanks.
Steve
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9397&t=9397
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]