Have a look at the Hardware Software compatibilty tool
http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
The vip4-80 requires 12.1.3 minimum
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
----- Original Message -----
From: "Donohue, Steve"
To:
Sent: Thursday, June 21, 2001 2:25 PM
Subject: VIP4-80 help [7:9397]
> Hey Gang,
>
> I am wondering if anyone out there has had any problem with the VIP4-80s
for
> 7500 router. I currently am unable to get the VIP recognized by the
router.
> When I look at the diagbus for that slot I receive the following
> information.
>
> Slot 5:
> Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0
> Internal Instruction Error, Microcode Status 0x0
> Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded
> Board is disabled
> Pending I/O Status: None
> EEPROM format version 1
> VIP4-80 RM7000 controller, HW rev 2.01, board revision A0
> Serial number: 18547357 Part number: 73-3143-03
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00
> 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x201 Insertion time: 0x8AE0 (00:18:14 ago)
>
> VIP Controller Memory Size: Unknown
>
> How do I get this VIP to be analyized, enabled, memory recognized, and the
> Microcode status to 0X4?
>
> Any help would be greatly appreciated.
>
> Thanks.
>
> Steve
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9401&t=9397
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
