I have a customer running the OC12 PA in a VIP4-80 without any problems. Of
course they are running a Service Provider 12.0S Image, I believe 12.0(15)S.
The 12.1E Train also supports both for Enterprise solutions, the same
customer tested it with 12.1(2.6someverylongmumbojumbo)E because they wanted
to work with an Enterprise Image.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
----- Original Message -----
From: "Kevin Wigle"
To:
Sent: Thursday, June 21, 2001 3:26 PM
Subject: Re: VIP4-80 help [7:9397]
> What IOS release are you running?
>
> We implemented two of these, one each in a 7513 and a 7505 to be able to
use
> OC12 PA.
>
> The search for an IOS that would run everything is still not over. It
seems
> that there is a bug with the Vip4-80 and OC12 PA.
>
> Tac is working on it.
>
> Kevin Wigle
>
> ----- Original Message -----
> From: "Donohue, Steve"
> To:
> Sent: Thursday, June 21, 2001 2:25 PM
> Subject: VIP4-80 help [7:9397]
>
>
> > Hey Gang,
> >
> > I am wondering if anyone out there has had any problem with the VIP4-80s
> for
> > 7500 router. I currently am unable to get the VIP recognized by the
> router.
> > When I look at the diagbus for that slot I receive the following
> > information.
> >
> > Slot 5:
> > Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0
> > Internal Instruction Error, Microcode Status 0x0
> > Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded
> > Board is disabled
> > Pending I/O Status: None
> > EEPROM format version 1
> > VIP4-80 RM7000 controller, HW rev 2.01, board revision A0
> > Serial number: 18547357 Part number: 73-3143-03
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00
> > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x201 Insertion time: 0x8AE0 (00:18:14 ago)
> >
> > VIP Controller Memory Size: Unknown
> >
> > How do I get this VIP to be analyized, enabled, memory recognized, and
the
> > Microcode status to 0X4?
> >
> > Any help would be greatly appreciated.
> >
> > Thanks.
> >
> > Steve
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9412&t=9397
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
