Hi, as far as i remember, once i had the same problem,
VIP was not recognised, and the problem was solved by
upgrading the bootstrap software.
hope it will solve the problem
Shoaib
--- "Donohue, Steve" wrote:
> Hey Gang,
>
> I am wondering if anyone out there has had any
> problem with the VIP4-80s for
> 7500 router. I currently am unable to get the VIP
> recognized by the router.
> When I look at the diagbus for that slot I receive
> the following
> information.
>
> Slot 5:
> Physical slot 5, ~physical slot 0xA, logical
> slot 5, CBus 0
> Internal Instruction Error, Microcode Status
> 0x0
> Master Enable, LED, WCS DBUS Cmd Enable, WCS
> Loading, WCS Loaded
> Board is disabled
> Pending I/O Status: None
> EEPROM format version 1
> VIP4-80 RM7000 controller, HW rev 2.01,
> board revision A0
> Serial number: 18547357 Part number:
> 73-3143-03
> Test history: 0x00 RMA number:
> 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03
> 00 00 00 00
> 0x30: 50 05 35 00 00 00 00 00 00 00 00 00
> 00 00 00 00
>
> Slot database information:
> Flags: 0x201 Insertion time: 0x8AE0
> (00:18:14 ago)
>
> VIP Controller Memory Size: Unknown
>
> How do I get this VIP to be analyized, enabled,
> memory recognized, and the
> Microcode status to 0X4?
>
> Any help would be greatly appreciated.
>
> Thanks.
>
> Steve
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9419&t=9397
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]