Hi all,
Anybody got decent contact for short back to back cables *in UK* please?
I have a Cisco part number which I have not confirmed yet - CAB-HD60MMX-5. I
don't know the price yet either, but I should imagine it is easy to get them
cheaper elsewhere.
Cheers,
Gaz
""Dennis Laganiere"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Talk to Brad at OptSys, he's got a good price on a short DCE/DTC cable.
> It's much cheaper then buying two 6 foot $65 cables to connect two routers
> two feet appart on a rack. Send me an e-mail if you have trouble finding
> Brad, but he's on the list, and by the way, a really good guy. Good luck.
>
> --- Dennis
>
> -----Original Message-----
> From: no mail [mailto:[EMAIL PROTECTED]]
> Sent: Monday, July 09, 2001 4:29 PM
> To: [EMAIL PROTECTED]
> Subject: Re: back-to-back router connection! [7:11602]
>
>
> Try 1 60-15 DTE and one 60-15 DCE cable. You should be able to plug the 2
> 15-pin ends together.
>
> ""chica"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi,
> > i'm located in Germany and i'm trying to connect 3-4
> > routers back-to-back to simulate a WAN connection in a
> > lab.Over here in Germany we use the cable specs of
> > X.21
> > which is a 60-15 pin cable.The 60 pin end will fit in
> > one WIC 1T wan interface card,but the other end cannot
> > fit into the other router's WIC 1T interface,it only
> > fits in the AUI port.I want a situation where i would
> > connect router A's s0 to router B's s0, and not a
> > connection from s0 to AUI.Is there a way of getting
> > around this?I have searched the cisco' website,but
> > still can't figure it out.While configuring one router
> > as DCE and the other as DTE what should i watch out
> > for,or what command would do this.
> > I'ld appreciate it if anyone could come out with a
> > solution.
> > Thank you.
> > >chika
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Get personalized email addresses from Yahoo! Mail
> > http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11620&t=11602
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]