Uche,
Have you tried 'debug ppp' ?
Since this is the layer that isn't connecting. Can U
post the debug output ?
Regs,
Phil.
--- Uche Ishionwu wrote: >
Hello,...
> I changed my configuration somewhat, and removed
> a module. But my cisco
> 2620 still wont dial out.!!.....can someone look at
> the configuration and
> the error out put and let me know what may still be
> the cause.(Layer 1. and
> layer 2. -isdn events- are ok, but theres still no
> connection)
> -Uche.
> config------->
>
>
> oks>en
> Password:
> oks#sh conf
> Using 1496 out of 29688 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname oks
> !
> no logging console
> no logging monitor
> enable secret 5 $1$IU9Q$qYwqs3CXuKmsl1y1GjcM30
> enable password oks
> !
> username msn password 0 msn
> !
> !
> !
> !
> memory-size iomem 15
> ip subnet-zero
> no ip domain-lookup
> !
> isdn switch-type basic-net3
> !
> !
> !
> interface FastEthernet0/0
> ip address 192.168.0.2 255.255.255.0
> no ip directed-broadcast
> duplex auto
> speed auto
> !
> interface BRI0/0
> description OKS testing interface!
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> dialer pool-member 2
> isdn switch-type basic-net3
> !
> interface Dialer1
> description connected to ELSATEST
> ip address 192.168.8.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer pool 1
> dialer wait-for-carrier-time 90
> dialer string 00192658
> dialer hold-queue 10
> dialer-group 1
> ppp authentication chap
> !
> interface Dialer2
> ip address 192.168.8.3 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer pool 2
> dialer wait-for-carrier-time 90
> dialer string 00192658
> dialer hold-queue 10
> dialer-group 2
> no cdp enable
> ppp authentication chap
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> no ip http server
> !
> access-list 99 permit any
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx permit
> dialer-list 2 protocol ip list 99
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> password uche1
> login
> !
> no scheduler allocate
> end
>
> oks#
>
********************************************************************
> 00:13:236223201280: ISDN ERROR: Module-CCBRI
> Function-_Go Error-Event
> receive
> d for an unrecognized call. Data- B6, 0
[EMAIL PROTECTED]
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11664&t=11653
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]