Uche,
You may have an end-to-end connectivity problem. What does "debug ppp
negotiation" give you. I believe your ISDN line is good, and the problem
might be the other end. Also, try dropping ppp multilink.
CM
> -----Original Message-----
> From: Uche Ishionwu [mailto:[EMAIL PROTECTED]]
> Sent: 10 July 2001 11:28
> To: [EMAIL PROTECTED]
> Subject: RE: Still having BRI stress! [7:11653]
>
>
> Christian,
> I have IOS version 12.0. currently running......see config
> below I also
> configured the line as ppp multilink......just check out the
> config, and let
> me know what's wrong.
>
> PS: Are u in Germany by any chance???? - please let me know.
> cheers!
>
> config----->
>
>
>
> oks#sh conf
> Using 1721 out of 29688 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname oks
> !
> no logging monitor
> enable secret 5 $1$IU9Q$qYwqs3CXuKmsl1y1GjcM30
> enable password oks
> !
> username msn password 0 msn
> !
> !
> !
> !
> memory-size iomem 15
> ip subnet-zero
> no ip domain-lookup
> !
> isdn switch-type basic-net3
> isdn voice-call-failure 0
> isdn tei-negotiation first-call
> !
> !
> !
> interface FastEthernet0/0
> ip address 192.168.0.2 255.255.255.0
> no ip directed-broadcast
> duplex auto
> speed auto
> !
> interface BRI0/0
> description OKS testing interface!
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> dialer pool-member 2
> isdn switch-type basic-net3
> isdn twait-disable
> !
> interface Dialer1
> description connected to ELSATEST
> ip unnumbered BRI0/0
> ip access-group 1 in
> ip directed-broadcast
> encapsulation ppp
> dialer remote-name msn
> dialer pool 1
> dialer idle-timeout 2147483 either
> dialer wait-for-carrier-time 90
> dialer string 0192658
> dialer hold-queue 100
> dialer-group 1
> no cdp enable
> ppp authentication chap
> ppp multilink
> !
> interface Dialer2
> ip address 192.168.8.3 255.255.255.0
> ip access-group 1 in
> ip directed-broadcast
> encapsulation ppp
> dialer pool 2
> dialer idle-timeout 2147483 either
> dialer wait-for-carrier-time 90
> dialer string 0192658
> dialer hold-queue 100
> dialer-group 2
> no cdp enable
> ppp authentication chap
> ppp multilink
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> no ip http server
> !
> access-list 1 permit any
> access-list 99 permit any
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx permit
> dialer-list 2 protocol ip list 99
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> password uche1
> login
> !
> end
>
> oks#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11678&t=11653
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
