I hope u can help. With the message below it would appear the it has bad
mem, but I replace it. I got this error message on both router, the old and
the new. The only thing that was left in common was the IOS so I got a
different version and still the same problem.
Here is the error message
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c3660-jk8s-mz.122-1b.bin ...
Erasing flash at 0x30000000sector erase failed at location 0x30000000,
status 0x
20202020
flash sector will NOT erase...aborting
rommon 2 >
-----Original Message-----
From: Peter Slow [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 8:59 AM
To: [EMAIL PROTECTED]
Subject: RE: 3660 router [7:11917]
open up hyperterm, connect to console, log the session, flick the power
switch, and let it drop into ROMMON.
then you need to post the text file IN LINE with your next email.
THEN we can help you.
-----Original Message-----
From: Mears, Rob [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 9:33 AM
To: [EMAIL PROTECTED]
Subject: 3660 router [7:11917]
Any one ever had a problem loading IOS on a 3660 right out of the box? I
have one with 64meg flash and 256 ram and the damn thing will not come out
of RMMON. I have set the confreg to boot correctly still RMMON. I have
flashed it with two different IOS (121&12.2), swapped out Flash, MEM, even
sent the chassis back to Cisco and the new one had the same problem. TAC has
no clue, they have been sending me part and giving me to different Engineer
with no luck.
What gives?
Rob
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11950&t=11917
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
