The best way to see what the problem might be is to download the smalled ios
possible (ip only), then watch the router boot.
If it boots and you do not see any problems with the flash, copy the ios
over via xmodem. (change the serial port to 115200 using confreg) As the
router boots, whatch for memory errors and whatnot to make sure all is well.
After the router boots up and is in running condition, tftp whatever image
you want straight to flash. (remember, using xmodem to copy an image over
only puts it in memory for booting)
If you see any erros, start removing ram/flash to see if the errors go away.
If you are still hosed, chances are there is a hardware malfunction.
-Patrick
>>> "Mears, Rob" 07/11/01 09:32AM >>>
Any one ever had a problem loading IOS on a 3660 right out of the box? I
have one with 64meg flash and 256 ram and the damn thing will not come out
of RMMON. I have set the confreg to boot correctly still RMMON. I have
flashed it with two different IOS (121&12.2), swapped out Flash, MEM, even
sent the chassis back to Cisco and the new one had the same problem. TAC has
no clue, they have been sending me part and giving me to different Engineer
with no luck.
What gives?
Rob
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11951&t=11917
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
