Those were either auto generated, or picked up from reading frames on the
wire.
-----Original Message-----
From: Elmer Deloso [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 11:31 AM
To: [EMAIL PROTECTED]
Subject: IPX Network addresses [7:11990]
hi, group.
I just noticed that after installing NetWare server, it gave me this info
regarding types of IPX frames:
Frame type Network address
Ethernet_802.2 3D410DCD
Ethernet_802.3 1E0F4F9E
Ethernet_SNAP FF994BB0
Ethernet_II D393B805
For the IPX gurus in the group, can someone tell me if there is some type of
logic as to how the network address is translated from the type of frame
used?
Just to answer my curiosity.
Thank you.
Elmer
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions and other information in this message that do not relate to the
official business of this company shall be understood as neither given nor
endorsed by it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12006&t=11990
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
