Hi All,
I have a problem here with HSRP on 6509. The Cisco 6509 has 2 MSFC cards.
As I understand correctly, only the first card (active one) does the
routing. The second card (standby one) should do NOTHING, unless the first
card goes down (please correct me if I am wrong). In my case, things are
different. It seems both cards do the routing. When I do a trace on a
destination, the result flips flop between the actually IP addresses of the
vlan on both cards. Let's say I have VLAN 100 with:
Virtual IP address = 10.100.1.100 255.255.0.0
IP address on first card (active) = 10.100.1.1 255.255.0.0
IP address on second card (standbly) = 10.100.1.2 255.255.0.0
When I do the trace on a destination that pass through this 6509, some path
includes 10.100.1.1, while other includes 10.100.1.2
Is there some way I can check if the HSRP is configured correctly on my
6509? Thanks in advance!
Thomas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15570&t=15570
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
