What routing protocol are you running? EIGRP will do load sharing between
two interfaces.
JY
""Thomas N."" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> I have a problem here with HSRP on 6509. The Cisco 6509 has 2 MSFC cards.
> As I understand correctly, only the first card (active one) does the
> routing. The second card (standby one) should do NOTHING, unless the
first
> card goes down (please correct me if I am wrong). In my case, things are
> different. It seems both cards do the routing. When I do a trace on a
> destination, the result flips flop between the actually IP addresses of
the
> vlan on both cards. Let's say I have VLAN 100 with:
>
> Virtual IP address = 10.100.1.100 255.255.0.0
> IP address on first card (active) = 10.100.1.1 255.255.0.0
> IP address on second card (standbly) = 10.100.1.2 255.255.0.0
>
> When I do the trace on a destination that pass through this 6509, some
path
> includes 10.100.1.1, while other includes 10.100.1.2
>
> Is there some way I can check if the HSRP is configured correctly on my
> 6509? Thanks in advance!
>
> Thomas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15573&t=15570
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
