Hmm, how interesting.
Is that something you see often, or only in few cases?
Will it have ANY effect on the router at all, or will it just be
"empty"/unused information?
I would think that if they map a DLCI to your router that is live with
someone elses router, you could end up receiving unnecessary/unwanted
traffic if a pvc should be established by accident?
If you can come up with a real life horror story about this problem, please
do so.
Thanks,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 9:22 AM
To: [EMAIL PROTECTED]
Subject: Re: Fwd: For FR Grus.... [7:16635]
You don't have unused dlci's because you are in a hub and spoke...
You see those dlci's because the phone company you are going through employs
goobers that love to mis map pvc's.... :)
And unless you can figure out a way to filter at the dlci level, they stay
until you call the phone company and tell them to remove them.
-Patrick
>>> "Cisco Lover" 08/21/01 10:08AM >>>
Oopss....
Sorry guys...I donto know where it lost in b/w..Any way..I have write it
here again.
Thanks for the kind replies..
For eg,
our FR switch is setup for Full mesh,But out network is setup as Hub & Spoke
environment.In that case there must be some unused DLCI's on spoke routers
which we would still be seeing as active on these routers although they
would be of no use offcourse for this envioronmetnt.
Is there any way If we can get rid of these DLCIS on the spokes.i.e to
disable them or USE any method which block them to be appearing on spoek
routers.(without touching FR switch)
I know ....Must be confusing for majority here ..But ..
I AM SURE I WILL GET THE SOLUTION HERE AS WELL.
Thanks.
>From: "Cisco Lover"
>Reply-To: "Cisco Lover"
>To: [EMAIL PROTECTED]
>Subject: For FR Grus.... [7:16635]
>Date: Tue, 21 Aug 2001 07:06:08 -0400
>
>Hi Guys..
>
>Come with some New Queston..
>
>For eg,
>our FR switch is setup for Full mesh,But out network is setup as Hub &
>Spoke
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16658&t=16635
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]