How do you set up a sw as a full mesh and a network as a HUB and Spoke. I
dont understand.
----- Original Message -----
From: "Cisco Lover"
To:
Sent: Tuesday, August 21, 2001 7:08 AM
Subject: Fwd: For FR Grus.... [7:16635]
> Oopss....
>
> Sorry guys...I donto know where it lost in b/w..Any way..I have write it
> here again.
>
> Thanks for the kind replies..
> For eg,
>
> our FR switch is setup for Full mesh,But out network is setup as Hub &
Spoke
> environment.In that case there must be some unused DLCI's on spoke routers
> which we would still be seeing as active on these routers although they
> would be of no use offcourse for this envioronmetnt.
> Is there any way If we can get rid of these DLCIS on the spokes.i.e to
> disable them or USE any method which block them to be appearing on spoek
> routers.(without touching FR switch)
>
> I know ....Must be confusing for majority here ..But ..
>
> I AM SURE I WILL GET THE SOLUTION HERE AS WELL.
>
>
> Thanks.
>
>
>
>
>
> >From: "Cisco Lover"
> >Reply-To: "Cisco Lover"
> >To: [EMAIL PROTECTED]
> >Subject: For FR Grus.... [7:16635]
> >Date: Tue, 21 Aug 2001 07:06:08 -0400
> >
> >Hi Guys..
> >
> >Come with some New Queston..
> >
> >For eg,
> >our FR switch is setup for Full mesh,But out network is setup as Hub &
> >Spoke
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16666&t=16635
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
