Could you elaborate on the mapping of 0.0.0.0 to a DLCI? How does it come
about?
Thanks,
Scott
""Chuck Larrieu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> it used to be that you could do a clear frame-relay-inarp to accomplish
> this. however, since the advent of 12.x, I believe the only sure way is to
> reload.
>
> BTW, watch out for the mapping of 0.0.0.0 to your DLCI's! ;->
>
> Chuck
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 8:10 AM
> To: [EMAIL PROTECTED]
> Subject: RE: For FR Grus.... [7:16635]
>
>
> Doesn't disabling inverse arp only take effect on a router reboot?
>
>
>
> -----Original Message-----
> From: Scott Hoover [mailto:[EMAIL PROTECTED]]
> Sent: 21 August 2001 15:43
> To: [EMAIL PROTECTED]
> Subject: Re: For FR Grus.... [7:16635]
>
>
> You can disable inverse arp on each interface on the spokes and then clear
> the cache. That should prevent the spokes from seeing the unused dlci's,
> but will require a static map of dlci to ip for each dlci you want to use.
>
> ""Cisco Lover"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Oopss....
> >
> > Sorry guys...I donto know where it lost in b/w..Any way..I have write it
> > here again.
> >
> > Thanks for the kind replies..
> > For eg,
> >
> > our FR switch is setup for Full mesh,But out network is setup as Hub &
> Spoke
> > environment.In that case there must be some unused DLCI's on spoke
routers
> > which we would still be seeing as active on these routers although they
> > would be of no use offcourse for this envioronmetnt.
> > Is there any way If we can get rid of these DLCIS on the spokes.i.e to
> > disable them or USE any method which block them to be appearing on
spoek
> > routers.(without touching FR switch)
> >
> > I know ....Must be confusing for majority here ..But ..
> >
> > I AM SURE I WILL GET THE SOLUTION HERE AS WELL.
> >
> >
> > Thanks.
> >
> >
> >
> >
> >
> > >From: "Cisco Lover"
> > >Reply-To: "Cisco Lover"
> > >To: [EMAIL PROTECTED]
> > >Subject: For FR Grus.... [7:16635]
> > >Date: Tue, 21 Aug 2001 07:06:08 -0400
> > >
> > >Hi Guys..
> > >
> > >Come with some New Queston..
> > >
> > >For eg,
> > >our FR switch is setup for Full mesh,But out network is setup as Hub &
> > >Spoke
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16672&t=16635
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
