I don't believe so, at least on the newer 12.0 stuff, you can disable
frame-relay inverse-arp and then clear frame and your ok. I think
it may have behaved differently in the past though.
Brian
On Tue, 21 Aug 2001, Scott Hoover wrote:
> You might be right, I would have to test in it a lab. Can anybody give
> confirmation on this?
>
>
> -----Original Message-----
> From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 9:44 AM
> To: Scott Hoover; [EMAIL PROTECTED]
> Subject: RE: For FR Grus.... [7:16635]
>
>
> Doesn't disabling inverse arp only take effect on a router reboot?
>
>
>
> -----Original Message-----
> From: Scott Hoover [mailto:[EMAIL PROTECTED]]
> Sent: 21 August 2001 15:43
> To: [EMAIL PROTECTED]
> Subject: Re: For FR Grus.... [7:16635]
>
>
> You can disable inverse arp on each interface on the spokes and then clear
> the cache. That should prevent the spokes from seeing the unused dlci's,
> but will require a static map of dlci to ip for each dlci you want to use.
>
> ""Cisco Lover"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Oopss....
> >
> > Sorry guys...I donto know where it lost in b/w..Any way..I have write it
> > here again.
> >
> > Thanks for the kind replies..
> > For eg,
> >
> > our FR switch is setup for Full mesh,But out network is setup as Hub &
> Spoke
> > environment.In that case there must be some unused DLCI's on spoke
routers
> > which we would still be seeing as active on these routers although they
> > would be of no use offcourse for this envioronmetnt.
> > Is there any way If we can get rid of these DLCIS on the spokes.i.e to
> > disable them or USE any method which block them to be appearing on spoek
> > routers.(without touching FR switch)
> >
> > I know ....Must be confusing for majority here ..But ..
> >
> > I AM SURE I WILL GET THE SOLUTION HERE AS WELL.
> >
> >
> > Thanks.
> >
> >
> >
> >
> >
> > >From: "Cisco Lover"
> > >Reply-To: "Cisco Lover"
> > >To: [EMAIL PROTECTED]
> > >Subject: For FR Grus.... [7:16635]
> > >Date: Tue, 21 Aug 2001 07:06:08 -0400
> > >
> > >Hi Guys..
> > >
> > >Come with some New Queston..
> > >
> > >For eg,
> > >our FR switch is setup for Full mesh,But out network is setup as Hub &
> > >Spoke
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny, CCIE #8036 Scarlett Parria
[EMAIL PROTECTED] [EMAIL PROTECTED]
318-213-4709 318-213-4701
Netjam, LLC http://www.netjam.net
333 Texas St. VISA/MC/AMEX/COD
Suite 1401 30 day warranty
Shreveport, LA 71101 Cisco Channel Partner
toll free: 866-2NETJAM
phone: 318-212-0245
fax: 318-212-0246
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16675&t=16635
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]