At 05:18 PM 8/27/01 -0400, Marshal Schoener wrote:
>Thanks,
>
>It's a full T1. There was never a problem until there was a power outage.
>Ever since then, there have been strange problems trying to hit the remote
>servers from the offices...
>The setup is simple, being that it is HDLC and only really requires an IP
>address on the interface and some routes :)
>But, Im thinking that there can be a problem on one of the WICs...
> Thanks again,
Well, is it possible that you guys configured some settings, and forgot to
write the configuration to NVRAM? So a power outage caused you to load the
old configuration which is now... unfit for your network settings. When
was the next to last reboot of the box? Anyway, just something to think
about.
-Carroll Kong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17457&t=17437
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
