Here you go. It's called "easy IP". It's just NAT over a negotiated
interface.
http://www.cisco.com/warp/customer/793/access_dial/easyip.html
Tony M
#6172
----- Original Message -----
From: "Bob Lepine"
To:
Sent: Saturday, September 08, 2001 5:44 AM
Subject: Cable Modem, DHCP & NAT [7:19106]
> Hi, I have a 2600 router and the latest software so I can get a DHCP
number
> from my service provider. I'm trying to configure the router so that I can
> put my static network on the inside. It accepts the DHCP number but I
can't
> get it to do the translation to the inside seeing that the outside number
is
> not a static number. Anyone have experience with this?
> Any help would be appreciated.
>
>
> --
> Bob Lepine
> MCSE,MCDBA,CNA,CCNA,MCT
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19117&t=19106
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
